INDUSTRIAL HOSES

    LPG HOSE BS EN 1762: TYPE D


    Construction :

    Low permeation synthetic rubber tube resistant to n-pentane, single wire braids reinforcement and perforated outer cover, resistant to abrasion and outer exposure. Modified nitrile rubber black.

    Recommended For:

    Designed for the transfer of LPG in liquid or gaseous phase and natural gas.


    SERP ref #Hose ID inchHose ID mm Mean OD mmMax. WP (BAR- PSI) Min. BP (BAR- PSI)Min. Bend Radius inch
    M-LP-GH-81/2"12.722.725-363100-14504.0
    M-LP-GH-105/8"15.925.925-363100-14505.0
    M-LP-GH-123/4"19.131.025-363100-14506.3
    M-LP-GH-16 1"25.438.125-363100-14507.9
    M-LP-GH-201 1/4"31.845.025-363100-14509.8
    M-LP-GH-241 1/2"38.152.025-363100-145012.6
    M-LP-GH-322"50.867.025-363100-145015.7

    Industrial Hose :LPG HOSE FOR AUTOMOTIVE APPLICATION ISO 8789: TYPE E



    Construction :

    Low permeation synthetic rubber tube resistant to n-pentane, single synthetic yarns braid reinforcement and perforated outer cover resistant to weather and ozone.


    Application :

    Designed for use in motor vehicles with liquefied petroleum gas (LPG) installations.

    SERP ref #Hose ID inchHose ID mm Mean OD mmMax. WP (BAR- PSI) Min. BP (BAR- PSI)Min. Bend Radius inch
    M-LP-GH-41/4"6.413.725-363125-18122.75
    M-LP-GH-55/16"7.915.725-363125-18123.75
    M-LP-GH-63/8"9.516.925-363125-18124.5
    M-LP-GH-8 1/2"12.720.825-363125-18125.5
    M-LP-GH-105/8"15.924.925-363125-18126.5
    M-LP-GH-123/4"19.128.325-363125-18127.3


    HEAVY DUTY AIR / WATER HOSE Exceeds IS: 446 Type 1, 444 Type 2



    Application :

    Designed for heavy duty service in Mines, Construction work and general contracting and for other industrial used up to a maximum working pressure of 180PSI (12 kg/cm). This hose is suitable for both water and air and has a safety factor of 1:4

    Features :

    Rubber tube with braided synthetic yarn through 2", Cotton Fabric plies 3" and above. Abrasion resistant NR rubbers cover for longer life. Available in longer lengths with molded finish up to 1" size. *CAN OFFER UPTO 600PSI W.P. .


    SERP ref #Hose ID inchHose ID mmMean OD mmMax. WP (BAR-PSI)Min. BP (BAR-PSI)
    M-HDA-81/2"12.7020.0012-17150-714
    M-HDA-123/4"20.0028.5012-17150-714
    M-HDA-161"25.4035.5012-17150-714

Back

Back to Top

HOME CLIENTELE WORK SHOP RESOURCE LIBRARY DOWNLOAD BROCHURE